ph. 65 6702 5988 | fax. 65 6702 5987 | email. admin@wrapcws.com
   
 

 

  home clients products videos downloads contact careers  
     


Products
 
  Refineries & PetroChemical
  Oil & Gas Distribution
  Oil & Gas Transmission
  Civil
  Municipal
  Industrial
  Marine
  Offshore
   
  Introduction
  Our Range of Tools
        - Grinding
        - Cutting
        - Customised Robotic Systems
  HSE Advantages
  What you Save?
  Certificates & Awards
  Third Party Testings
  Application Examples
   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Products ~ Safety Tools Allmet ~ Application Examples

View the following examples in PDF

Examples
 
Examples
Our airtools operate at only 1000 to 3000 RPM
 
Examples
 
Examples
Third party tested surface profile which shows excellent adhesion, without a need for further treatment. Just grind and put your products directly over the fresh surface.
 
Exmaples
 
Examples
Excellent for mechanical work, coil tubing, etc
 
Exmaples
Different file sizes and motor available for different applications. The entire range of tools is powered by compressed air.
 
Exmaples
Grinding steel with special requirements. Taking the file into the steel at 35-40 degrees to grind off superficial cracks on steel to prevent propogating of the crack. Once crack removed, we can structurally rehabilitate the pipe back to its original integrity. Al under a cold work permit!!
 
Examples
Highly effective in remove rust and paint to fix spot corrosion. Arrest corrosion in its infancy stage and it will lead to enhanced maintenance in your assets.
 
Examples
We have 10 different designs of our rotary files. In this picture it shows our smallest file at
work.
 
Examples
This picture shows thick paint coatings (3mm of paint or more). This file is used to grind
aluminum, but it is also very effective on thick paint coatings.
 
Examples
All the files are great at removing chartech (fire insulation)
 
Examples
This file, the "Rough Boy" is an alternative to sandblasting. It removes paints effectively than other equipment and the surrounding area around the removal painted surfaces will not be damaged by sparks which may cause burning and spot corrsion.
No dust fragments flying around and it settles on the surface where grinding is done. Very
little effort is required to clean the area and protect the environment.
 
Examples
Cutting machine and weld seam removal system removes fillet welds on a double plate.
 
Examples
An example of removal double plates welded onto the ground on an offshore platform. All done under a cold work permit without a need for an expensive shutdown.
 
 

Featured Products

 



ThermoWrap CF


Safety Tools Allmet

EX   DNV
Certified Tools    

 

Our Clients

 

  • pic1
  • pic2
  • pic3
  • pic4

 

 

 

     
     
Copyright © 2012 WRAP Resources Asia Pacific Pte Ltd. All rights reserved